|
BE
SERIES
Self Priming Effluent Pump
These
centrifugal, self-priming effluent pumps are designed
for installations with septic tanks in areas with drainage
problems. Ideal for pumping out flooded basements, livestock
watering,
flood irrigation, and general dewatering.
CASING - Cast iron; 1¼"
NPT suction & discharge.
PRIMING & DRAIN PLUGS - ¾",
garden hose size.
MOTOR - CSA approved and continuous
duty rated, higher than NEMA service factor dual compartment
motors equipped with stainless steel shaft and automatic
thermal overload protection.
BUILT-IN CHECK VALVE - Facilitates
fast priming and guards against syphoning action.
IMPELLER - 4 vane, semi-open gray cast
iron, with "Blind Hole" for motor shaft protection.
SEAL - Carbon ceramic 5/8" mechanical.
Motors are:
1/3HP(115V) 9.4 full load amps
½HP(115/230V) 12.4/6.2 full load amps
¾HP(115/230V) 14.8/7.4 full load amps
|
